Goes without saying, but just in case...
Performing these mods may void your G25 warranty, or permanently damage your G25 shifter. If you choose to perform any of these mods, please be careful and do so at your own risk!

"No Clicking" Mod
Difficulty: Medium
Old Theory-
This mod reduces or removes the clicking sound when shifting from gear to gear. A piece of foam is inserted into the spring that presses a small metal ball against 3 groves in the metal side plates. Aparently the noise is caused by the spring hitting the metal ball and not the metal ball hitting the metal plate. The foam absorbs the sound and prevents the spring from touching the metal ball, therefore eliminating the click (almost). This also adds some extra resistance to the shifter when switching gears.

Updated Mod by fdkrew-
Removes dead space between ball and plastic housing to remove clicking sound.
See http://forum.rscnet.org/showpost.php...5&postcount=16


Updated Mod by xixel
Simplifies implementation of this mod by using a small piece of network cable
See http://forum.racesimcentral.com/show...3&postcount=41
Materials
1.small piece of foam

Photos
(foam)
http://www.bedoworks.com/images/g25/IMG_0547.JPG
http://www.bedoworks.com/images/g25/IMG_0548.JPG
http://www.bedoworks.com/images/g25/IMG_0549.JPG
(tube)
http://forum.rscnet.org/showpost.php...3&postcount=18

Videos
http://www.youtube.com/watch?v=uJZuK8rl1No
http://zoome.jp/gtfp/diary/3

Discussions
(foam)
http://forum.racesimcentral.com/showthread.php?t=293044
http://forum.rscnet.org/showpost.php...0&postcount=13
(tube)
http://forum.rscnet.org/showpost.php...5&postcount=16


Realistic Shifter Resistance
Difficulty: Medium
This mod increases the resistance of the shifter to give it a more realistic feeling.

This is very similar to the "No Clicking Mod", except that it focuses on making the
spring that locks the ball into place much harder to compress


Although this sounds easy in theory, there are a number of issues to be aware of.
Since the added force on the spring that clicks the ball into place is much greater,
you have to make sure you use some real hard packing material such as plastic or metal,
otherwise over time the spring will find its way back into the housing and the resistance
will lessen.

If the spring is not allowed to compress fully, the ball will not be able to clear the
groves properly, and this will cause extra strain on the metal plates, causing them to move
apart as you shift back and forth. To avoid this, consider bolding on additional reinforcement
to the metal plates to keep them in place. You can think of it as a strut for the housing
(See photos for pic)

To make room for the strut, there are several notches that need to be filed down from the upper
portion of the plastic case.
(See photos for pic)

In addition, if the plates are moving apart while shifting gears, the potentiometer that keeps
track of the "vertical" gears may not work well if the shifter is switched to sequential mode.
It seem that it is very sensitive to how far it travels to activate the Up/Down gears since in
sequential mode, the shifter doesn't travel all the way. With this mod, in sequential mode,
when the shifter is positioned in the up or down shift, because the ball will not be in one of
the groves, the plates may have moved apart enough to offset the potentiometer causing it not
to detect the up/down change. In other words, with this mod sequential shifting may not work!

Materials
1. Small piece of metal or plastic enough to pack inside the housing of the ball spring

Photos
http://www.bedoworks.com/images/g25/IMG_0575.JPG
http://www.bedoworks.com/images/g25/IMG_0576.JPG

Videos
http://www.youtube.com/watch?v=wVsvYJlwtqk

Stiffer Spring Mod
Difficulty: Medium
This mod stiffens the spring in the shaft to avoid accidentally pressing the shifter inwards or in reverse while switching gears.

Replace the original spring of the shaft with a stiffer one. I couldn't find a stiffer spring or invest the time to go buy one, so in the picture you'll notice that I added a second smaller spring to add the extra resistance. I imagine a proper stiff spring will work best.

Materials
1. Spring

Photos
http://www.bedoworks.com/images/g25/IMG_0540.JPG

Discussions
http://forum.racesimcentral.com/showthread.php?t=277322


More Resistance in Neutral Mod
Difficulty: Medium
This mod adds more resistance to the shifter when moving it from side to side.
A rubber band is wrapped around the centering spring to add the resistance.


Materials
1. Rubber band

Photos
http://forum.racesimcentral.com/atta...7&d=1162152998

Videos

Discussions
http://forum.racesimcentral.com/show...1&postcount=31


Reduced wobble in Neutral Mod
Difficulty: Medium
This mod removes the wobbling of the shifter when it is in neutral position, and gives it a stiffer and solid feel.

There are two parts to this mod. The first part is to remove the wobbling caused by the space between the shaft's plastic housing and the shaft itself. Inserting a small piece of plastic film to fill the space fixes this. (See 1st photo)


The second part is to eliminate the play in the centering spring. The centering spring wraps around the plastic shaft housing and provides resistance as the top portion moves from side to side. The top portion which touches the edges of the centering spring is actually about a millimeter thicker than the bottom portion which the spring uses to grip its other end. Shaving the top portion ever so slightly until the play is removed does the trick.


Materials
1. Knife
2. 5mm x 15mm piece of plastic film

Photos
Part 1
http://www.bedoworks.com/images/g25/IMG_0538.JPG
http://www.bedoworks.com/images/g25/IMG_0539.JPG
http://www.bedoworks.com/images/g25/IMG_0543.JPG

Part 2
http://www.bedoworks.com/images/g25/IMG_0545.JPG

Videos

Reduces Play in 3rd and 4th gear Mod
Difficulty: Easy
This mod reduces the play of the shifter while in 3rd and 4th gear caused by the design of the shifter. Line the inside of the plastic housing where the shifter operates with a piece of rubber or foam. The metal shaft should not touch the plastic housing when it is in gear. It should touch the lining. When the shifter is in 3rd and 4th gear, the pressure against the padding will prevent it from wobbling side to side, giving it a solid feel. This will also add additional noise reduction when shifting hard as the metal will not slam against the plastic.

Materials
1. Knife
2. 5mm x 15mm piece of plastic film

Photos
http://www.bedoworks.com/images/g25/IMG_0550.JPG


Different Knob Mod
Difficulty: Easy
This mod replaces the original knob of the shifter with a custom one.
I've seen this somewhere, but cannot find a picture. Please help.

Materials
1. Flat head screwdriver to remove clip-off stock gear knob cap (I just did it with my fingernail)
2. Phillips head screwdriver to unfasten stock knob
3. Replacement knob (and adapter if knob does not fasten straight onto shaft - my adapter required a 3mm alan key)

Photos
http://forum.rscnet.org/showpost.php...6&postcount=11
http://forum.rscnet.org/showpost.php...7&postcount=12

Discussions
http://forum.rscnet.org/showpost.php...6&postcount=11


Sequential Mode Lock Mod
Difficulty: Easy
This mod prevents accidentally shifting into gear while in sequential mode.


Discussions
http://forum.rscnet.org/showpost.php...9&postcount=19


Disassembling the Shifter
Photos
http://forum.rscnet.org/showpost.php...5&postcount=17

All of the above can be seen here in it's full length - If you have access to RaceSimCentral
http://forum.rscnet.org/showthread.php?t=299371


Vu sur: http://www.ps3forums.com/showthread.php?t=129799

miondana g25 mitsy v? fa tsara b le astuce an

Henjana ihany ity miketrika Gvintss ty raha zao a!!

alohan'ny hahitana an'ilay ketrika zany d mbola mila mianatra teny anglisy indray koh aloh

Soa fa nisy ianao ry clavier mbô marina moa

Dear instructor!

It's très bien to know how use the G25, mais it's not possible to nous apprendre by pratique???

because the time to etudier l'anglais is teritery ihany an

Sinon nen'lah Tsi² ny solution de aleo tonde any @ DACTIGRAZ @ zay ela tsy mila mijery clavier intsony de mihatsara ny temps

angaha moa izay le izy fa tsy hoe manao RBR tsy mijery ecran ialahy

Mitondra sans les mains ka, otrany le mitondra beka t@ mbola kely reny

Mahalatsaka mihitsy lisany reto

Izaho izany manana proposition e :

Pour éviter les problèmes de G25, débarassez-vous en !

Dia ario aty amiko fa manolo-tena aho hanangona azy

niomehy an'Radoda9 fa zay ny ahy vao vita matavy ny sequentiel fa miova hoazy ny vitesse dia tsy mety refa mi-retrograde ....bon mila fotoana zany hanao ilay démontage an'ilay shifter fa.......pour l'instant aloha dia hianatra @ palette indray zao ........kiiiiiiii betsaka koa zany hianarana zany vue cockpit; palette; reglave vao².........pfffffff hozy ilay olona iray zay oe "tu sera prêt dans un mois " oui mais entre temps les points filent pour le team fa tsy maninona eeeee.........tady hanomboka hanamerda ity rBR ity zany an !!!

Tsy maintsy ho atao indray ilay mod ity... iza no efa nanao koa?